You lift the first pizza and see a black base under a pale top. It is tempting to blame the launch. Check the oven setting first.
Verdict: If the base burns on the Neapolitan preset, try a custom setting at 400 C with Crisping Intensity at 5. Use Boost as the oven directs. That mix helped one T3 reviewer, but he used different dough too. If the default cooks your pizza well, keep it.
Check what burned
T3’s reviewer got a black, hard base with the default Neapolitan program. He read the preset as 430 C and thought it gave his thin dough too much heat from below. That is his reading of the setting, not a published stone temperature from Ooni.
Tom’s Guide liked the default pizza setting. Engadget also made good Neapolitan pizza with a preset. Your dough and the pizza’s thickness can change the result, so treat the preset as a starting point.
Try one lower heat setting
T3 later got a better pizza at 400 C with Crisping Intensity at 5, the highest level. That sends more heat toward the top. He also used different dough, so the setting alone did not prove the fix. Save it in one of the Volt 2’s 2 custom slots and try it with the same dough you used before. That gives you a cleaner comparison.
Use Boost when the top needs help
Boost gives the top element a short burst of heat. T3 says he turned it on by holding the main dial until the light turned solid green. Engadget says the burst lasts about 45 seconds and helps the stone heat up again between pies. Watch the top as you use it; a short burst can still be too much for a thin pizza.
The goal is simple: cook the top before the base goes too far.
Change one thing at a time
Do not change the preset, dough, toppings, and bake time all at once. Try the lower setting with the same dough first. If that does not help, note how thick the base is and whether the dough was still cold when you shaped it. Keep a simple note so your next pizza teaches you something.
Know what the setting cannot do
You cannot turn down the lower element by itself. The older Volt 12 had a dial that shifted heat between top and bottom. The Ooni Volt 2 uses presets, Crisping Intensity, and Boost instead. If you want a separate bottom-heat dial, that is a reason to compare other ovens before buying.
Who should skip this fix
If your bases already come out the way you want, leave the preset alone. There is no prize for changing a setting that works.
If the next base burns too, try one more change before blaming your launch. A thicker base or shorter bake may matter more than a new preset for your dough. Keep the pizza size and topping amount the same while you test. That way, you can tell which change helped.
Start with one test pizza and write down what happened underneath. Keep the setting that makes the top and base finish together.



