The lights go out. Your laptop keeps going, but the call disappears because the router did not get the memo.
Verdict: size backup power for the desk you need, using measured watts and the hours you want to cover. A small UPS can bridge a short interruption; a power station is worth considering when you need longer. Measure before buying.
The easy math
Watts describe the load. Watt-hours describe stored energy. Measure the equipment together during a realistic work session, including the modem or fiber terminal, then multiply that average draw by your required hours.
For a worked example, assume an 80W desk for 8 hours: 640Wh must reach the devices. If you assume 85% usable capacity, divide by 0.85 to get about 753Wh of rated capacity. That percentage is a planning assumption, not a tested efficiency for any station here. Losses and operating conditions change the result; test with headroom.
Match the battery to your desk
Laptop and network equipment. The Jackery Explorer 1000 v2 has a manufacturer-rated 1,070Wh capacity and LiFePO4 battery. It may fit that example; test runtime. I own a Jackery, but these specifications apply to this model specifically.
More screens or longer hours. The Anker SOLIX C2000 Gen 2 offers 2,048Wh. Anker lists 88 minutes for AC charging and 58 minutes with AC and solar combined, under its test conditions. It also weighs 41.7 pounds. Choose its home in advance.
A desktop running local AI. My desktop runs a local model, but a gaming benchmark cannot tell me its draw. Measure your own workload, check that the station’s continuous output can handle it, and decide which tasks can move to a laptop. Check capacity and output watts separately.
UPS or power station? Often both
A UPS sits between the wall and your equipment to bridge an interruption. The APC BE600M1 is rated at 600VA/330W. Check its runtime curve at your measured load; the output rating alone does not tell you how many minutes you get. Use its battery-backed outlets, since 2 outlets provide surge protection only.
Jackery lists a transfer time within 20 milliseconds for the Explorer 1000 v2 and warns that it is not a zero-interruption UPS for equipment requiring uninterrupted power. A desktop may restart during transfer. Test your equipment rather than trusting the word UPS on a box.
Add Starlink without stress
Starlink’s specification sheets list average consumption of 25–40W for Mini and 75–100W for Standard 4 X. Add that load to the calculation if satellite is your backup. See backup internet for working from home.
Small solar: the honest version
My Jackery has small solar panels. Without measured output, I’d leave it out of the office runtime calculation. For a separate panel, check the station’s supported input voltage, connector and charging limits. A panel’s nameplate output is not a promise of what reaches the battery in your weather.
Safety notes
The Belkin 12-Outlet Surge Protector is a surge-protection option, not a battery. Follow the connection manuals. If you use a fuel-burning generator, CPSC says outdoors only, at least 20 feet from the home with exhaust facing away; never run it in a garage. Keep working carbon-monoxide alarms inside.
Who should skip the big battery
If your laptop’s battery and a short bridge for the router cover the interruption, skip the large station. For longer outages, write down your measured load and required hours before buying. Then test the connection too: powered network equipment cannot repair an outage beyond your home. See the full outage plan.
Cited sources
- Jackery, Explorer 1000 v2 specs and transfer limitations.
- Anker SOLIX, C2000 Gen 2 capacity, weight and charging conditions.
- Schneider Electric, APC BE600M1 ratings and outlets.
- Starlink, Mini specification sheet.
- Starlink, Standard specification sheet.
- Belkin, surge-protector category and specifications; regional specifications.
- CPSC, generator safety.



